WireTrim® ​Accessories



Plazmask

Plazmask

PlazMaskTM is a pre-taped (5/8” masking tape) and pre-folded high density plastic film. PlazMask is 65 feet long and unfolds or drops to 60 inches. It is designed to protect large surfaces from overspray, while also reducing waste created by the old alternative of using paper masking products. Use PlazMask to mask truck bodies for spray-on truck bed liners or as fast and easy protection for any paint or coating application.

Spray Shop Supplies



Cup Brushes

6 Inch Abrasive-Filament Cup Brush

Our cup brush is ideally suited for prepping a truck bed for increased adhesion of the spray-on liners. Prep up to 50 trucks with one cup brush and do a better job with less effort and in half of the time required for hand scuffing. The nylon filaments of the cup brush are impregnated with silicon carbide and perform best at low speed (1000-2000 RPM) leaving an effective swirl pattern and less dust. This cup brush will mount to our low-cost pneumatic polisher or to any standard, low-speed electric and pneumatic polishers with a 5/8-11 UNC spindle.

Spray Shop Supplies



Polisher

Vertical Pneumatic Air Polisher

We have tested this well-priced, low-speed pneumatic polisher for use with our abrasive-filament cup brush. The results were excellent. The use of this combination air tool and cup brush will reduce the time spent hand scuffing and will produce better results. We recommend a minimum of a 5 horsepower air compressor for adequate air volume. The spindle size is 5/8-11 UNC.

Spray Shop Supplies



Air Supply

Supplied Air Respirator System

This NIOSH approved fresh air system package delivers clean, breathable air into a disposable tyvek hood eliminating the possibility of an improperly fitted mask while providing comfort for the operator. The air pump is portable and oil-less, producing no carbon monoxide or oil vapors and does not require carbon monoxide monitoring or other alarm systems. The pump comes fully assembled including all filters, fittings and couplers. The system package includes one hood with supply hose and belt harness, a 3/4HP ambient air pump with a 50ft air hose and 10 peel-off lens covers.

Spray Shop Supplies



Desiccant Air Dryer

Desiccant Air Dryer

Remove dirt, water, oil and uncondensed moisture from compressed air lines. The Desiccant system’s 100% indicating silica gel provides maximum moisture absorption. The blue Silica Gel Desiccant Beads turn pink when saturated. It features easy desiccant change out, regenerate, or replacement.

Spray Shop Supplies