WT ProLine S 100FT
WT ProLine S 100FT
Product: 8657008

1/4-Inch X 100 Feet. Contains a .008" diameter, high-tensile metal wire filament. Offers excellent cutting strength, and works best in most applications. Conforms well to compound curves and tight corners. Trim a wide variety of coatings, from medium durometer polyurethane to high durometer polyureas.

Purchase a 10-Roll box for the best price.

Product Options:



Quantity:

ProLine

ProLine is the original double-sided edge-cutting tape, known for its unique high-tack, co-polymer adhesive that sticks instantly while allowing for unlimited repositioning. This is our most popular trimming tape and has become the industry standard, used to trim virtually every type of spray-on truck liner. ProLine can be used to trim everything from medium durometer polyurethane, applied with a low pressure spray system at room temperature, to high durometer polyureas, applied with high pressure at elevated temperatures.

The fine crepe-paper body of ProLine tape allows the applicator to tear the tape manually and position it around curves and irregular surfaces with ease. The unique thickness and body of ProLine enables precise placement and conformity to nearly any shape or surface. The high-tack adhesive also serves to hold the tape in place while sanding or scuffing along the edge and importantly, keeps the filament edge tight to the surface, eliminating a spray-on coating from passing below and past the cutting edge.

ProLine was developed to perform perfectly. The fine paper tape enables access to the filament by hand-tearing of the tape and also permits the filament to glide through the tape and coating without pulling the tape away from the surface prematurely.

WireTrim

The main function of WireTrim Edge Cutting Tape is trimming through strong coatings from the bottom up. The method involves the use of a small high-strength cutting filament, adhered to the edge of adhesive tape and positioned on a surface along the desired trim line where the coating is to be applied. After applying a coating, the filament is pulled upwards from beneath the new coating, achieving a clean cut from the bottom up, separating the masking material and tape for easy removal from the border of the new coating. The method produces a perfect edge without leaving a mark or in any way damaging the exposed surface or disturbing the adhesion of the new coating.

  • WireTrim Edge Cutting Tape

Abrasive Cup Brush 6"
Abrasive Cup Brush 6"
PlazMask Pre-Taped Masking Film, 5
PlazMask Pre-Taped Masking Film, 5'x65'
PlazMask Plastic Sheeting, 12
PlazMask Plastic Sheeting, 12'x400'
Spray Suit - Hooded
Spray Suit - Hooded
US$10.50
4
PlazMask Pre-Taped Masking Film, 2
PlazMask Pre-Taped Masking Film, 2'x65'
Product: 5270856
PlazMask Pre-Taped Masking Film, 3
PlazMask Pre-Taped Masking Film, 3'x65'
Product: 5270857
PlazMask Pre-Taped Masking Film, 5
PlazMask Pre-Taped Masking Film, 5'x65'
Product: 5270860
3