WireTrim Products
proline_heading
proline_spool
ProLine is the original double-sided edge-cutting tape, known for its unique
high-tack, co-polymer adhesive that sticks
instantly while allowing for unlimited repositioning. This is our most popular trimming tape and has become the industry standard, used to trim virtually every type of spray-on truck liner. ProLine can be used to trim everything from medium durometer polyurethane, applied with a low pressure spray system at room temperature, to high durometer polyureas, applied with high pressure at elevated temperatures. The fine crepe-paper body of ProLine tape allows the applicator to tear the tape manually and position it around curves and irregular surfaces with ease. The unique thickness and body of ProLine enables precise placement and conformity to nearly any shape or surface. The high-tack adhesive also serves to hold the tape in place while sanding or scuffing along the edge and importantly, keeps the filament edge tight to the surface, eliminating a spray-on coating from passing below and past the cutting edge. ProLine was developed to perform perfectly. The fine paper tape enables access to the filament by hand-tearing of the tape and also permits the filament to glide through the tape and coating without pulling the tape away from the surface prematurely.

 TRIMMING TIPS: For best results, peel ProLine away from the surface slowly. With a little experience, the method required for clean removal is readily achieved.

1/4 inch wide x 100 foot roll, AVAILABLE IN s h f

thinline_spool
thinline_heading


ThinLine features a thin, transparent, double-sided polyester tape with a medium-tack adhesive, developed for applications where less adhesive strength is preferred. The release liner is a similar silicon-treated paper used with ProLine, while the tape itself is thin and flexible. The unique adhesive incorporated in ThinLine, while providing lower peel resistance, requires a slightly different removal process than ProLine or RedLine. 

TRIMMING TIPS: During the initial application of ThinLine tape, if you need to reposition the tape, remove the tape from the surface by pulling away slowly and then re-apply. When a reactive coating is applied, the extra heat created by the chemical reaction of some products may change the adhesive properties of the tape. After pulling the filament out to trim the coating, remove the tape by pulling it away from the surface rapidly to produce the best result for a clean surface.
1/4 inch wide x 100 foot roll, AVAILABLE IN s h f
redline_spool
redline_heading




RedLine incorporates a transparent, double-sided polyester tape with a unique high/low temperature, chemical-resistant adhesive. RedLine has a high-tack, full body adhesive, developed for difficult applications, particularly useful on most plastic surfaces, including vehicle trim components such as tailgate guards, fender skirts and rocker panel moldings.

The signature red-tinted polyethylene release liner is easy to locate, flexible and tear-resistant, important elements for fast tear-off in a production environment. The liner being translucent, also allows for see-through inspection. RedLine is very flexible and conforms to curves and tight corners while maintaining excellent body and feel. RedLine is a premium product, well suited for application to die-cuts and other specialty masking systems. The special physical properties of RedLine allow for quick, residue-free removal.

1/4 inch wide x 90 foot roll, AVAILABLE IN s h

fibertrim_headingfibertrim_spool


FiberTrim is a single-sided paper masking tape incorporating a high-strength braided filament located along the edge of the adhesive surface. FiberTrim features a low-tack adhesive suitable for situations where the paint finish might be marginal.

1/4 inch wide x 100 foot roll, AVAILABLE IN f

s_2
  Standard Duty- A .008 diameter, high-tensile metal wire filament that offers excellent cutting strength and works
  best in most applications. Conforms well to compound curves and tight corners.
h_2

   Heavy Duty- A .010 diameter, high-tensile metal wire filament that provides over 50% more cutting strength with
   somewhat less flexibility. Used for thicker, harder, and aggregate-filled coatings.


f_2 
  Heavy Duty Fiber- A braided synthetic fiber filament that offers excellent cutting strength and cuts through thick
  non-abrasive coatings. Conforms easily to compound curves and tight corners.